Data Sheet |
Description |
SmartMesh-XD 2.4GHz 250kbps |
XDM2140 2.4 GHz Ultra Low Power Mesh RF Transceiver Module
Based on DUST Networks’ SmartMesh-XD™ technology, RFM’s XDM2140
module is designed to provide excellent communications reliability and long
battery life in a wide range of sensor network applications. The XDM2140’s
combination of an IEEE802.15.4 transceiver and Time Synchronized Mesh
Protocol (TSMP) blends the reliability of self-organizing and self-healing mesh
networking with synchronized power duty cycling to achieve very long battery
life operation. The XDM2140 is tailored for use in battery and line powered
wireless devices for applications that require proven performance and
scalability. The multifunctional interface of the XDM2140 gives it the flexibility
to be used in a wide variety of applications, from energy management to
building control to machine health monitoring. The XDM2140 requires no
embedded programming, greatly reducing the development time and cost of a
wireless sensor network application. The XDM2140 is certified for unlicensed
operation in the USA, Canada and Europe. The XDM2140 complies with
Directive 2002/95/EC (RoHS)
|
XDM2140C
XDM2140P |
XDM2140 Transceiver Module (2.4 GHz) |
 |
Ultra Low Power Consumption
Innovative radio design consumes 80% less power in receive mode than competing solutions
Ultra-efficient power usage, enabled through SmartMesh Intelligent Network management, delivers over a decade of network operation on two AA batteries
Automatic network-wide coordination for efficient power usage
Ultra Reliable Networking
SmartMesh-XD™ protocol delivers greater than 99.9% typical network reliability
Frequency hopping provides interference rejection and minimizes multipath fading
Mesh networking provides built-in redundancy
Every XDM2140 acts as both and endpoint and a router, increasing network reliability with mesh-to-the edge™
Automatic self-organizing mesh networking capability built in
Easy Integration
XDM2140 provides all the module functionality with no embedded programming or complex configuration requirements
XDM2140 interfaces is well designed and multi-functional
High-level Data Link Control (HDLC) serial interface includes bi-directional flow control
Industrial temperature range -40 to +85 °C
XDM2140P version for plug in installation, XDM2140C version for solder reflow
|
DM2200 Series 434MHz / 916MHz 4.8 and 9.6kbps |
DM2200 Versatile, Long Range Mesh Networking
The DM2200 Module is a versatile embedded solution for general mesh networking applications for wireless sensor networks. The DM2200 sets a new standard in the ability to achieve long link distances with a module whose low power consumption enables it to operate for extended periods on battery power. Its mesh networking protocol can be configured to provide the optimal balance between communications performance, battery life and memory usage for any particular application. The DM2200 is the means to connect a wide range of devices and machines to the Internet.
|
 |
Single digitally modulated channel operating centered on 433.92 or 916.5 MHz unlicensed frequency
Long communication range of up to 600 meters (open air)
Ultra-low power consumption in receive and sleep modes
Channel data rate of 9.6 Kbps
Serial I/O port (UART)
7 general purpose I/O ports
VersaMESH™ network protocol
|
|
DM2200-434VM |
DM2200 Transceiver Module (433.92 MHz) |
|
DM2200-916VM |
DM2200 Network Node (916.5 MHz) |
|
DM2200-916VM-1 |
DM2200 Transceiver Module (916.5 MHz) |
|
IM2200 |
DM2200 Application Interface Module |
|
IM2200-1 |
DM2200 Application Interface Module |
DM1800 / DM1810 Series 434MHz / 916MHz 9.6kpbs |
DM1800 Inexpensive Mesh Networking
The RFM DM1800 Module is an inexpensive embedded solution for small mesh networking applications of several hundred nodes. The DM1800 is based on an RFM ASH radio and a PIC microcontroller, and is ideal for applications that require long-life operation on batteries. The DM1800 includes the miniMESH™ networking protocol that uses router nodes to extend network coverage.
|
 |
Single fixed channel RF transceiver operating on either 433.92 or 916.5 MHz unlicensed frequencies
Channel data rate of 4.8 Kbps
Ultra-low power consumption in transmit, receive and sleep modes
Easy to setup and configure
Serial I/O port (UART)
Single analog input with 10-bit A/D converter
1 logic input, 1 logic output
miniMESH™ network protocol
|
|
DM1800-434MB |
DM1800 Base Station (433.92 MHz) |
|
DM1800-434MN |
DM1800 Field Node (433.92 MHz) |
|
DM1800-434MN-V |
DM1800 Field Node with Host Serial Interface (433.92 MHz) |
|
DM1800-434MR |
DM1800 Network Router (433.92 MHz) |
|
DM1800-434MR-V |
DM1800 Network Router (433.92 MHz) |
|
DM1800-434MR-PAH & PBH |
DM1800 Packaged Network Routers for Horizontal Mounting (433.92 MHz) |
|
DM1800-434MR-PAV & PBV |
DM1800 Packaged Network Routers for Vertical Mounting (433.92 MHz) |
|
DM1800-916MB |
DM1800 Base Station (916.50 MHz) |
|
DM1800-916MN |
DM1800 Field Node (916.50 MHz) |
|
DM1800-916MN-V |
DM1800 Field Node with Host Serial Interface (916.50 MHz) |
|
DM1800-916MR |
DM1800 Network Router (916.50 MHz) |
|
DM1800-916MR-V |
DM1800 Network Router (916.50 MHz) |
|
DM1800-916MR-PAH & PBH |
DM1800 Packaged Network Routers for Horizontal Mounting (916.50 MHz) |
|
DM1800-916MR-PAV & PBV |
DM1800 Packaged Network Routers for Vertical Mounting (916.50 MHz) |
|
IM1800 |
DM1800 Application Interface Module |
|
IM1800-1 |
DM1800 Application Interface Module |
| |
DM1810 Inexpensive Mesh Networking
The RFM DM1810 Module is an inexpensive embedded solution for small mesh networking applications of several hundred nodes. The DM1810 is based on an RFM ASH radio and a PIC microcontroller, and is ideal for applications that require long-life operation on batteries. The DM1810 includes the miniMESH™ networking protocol that uses router nodes to extend network coverage.
|
 |
Single fixed channel RF transceiver operating on either 433.92 or 916.5 MHz unlicensed frequencies
Channel data rate of 4.8 Kbps
Ultra-low power consumption in transmit, receive and sleep modes
Easy to setup and configure
Serial I/O port (UART)
Single analog input with 10-bit A/D converter
1 logic input, 1 logic output
miniMESH™ network protocol
|
|
DM1810-434MB |
DM1810 Base Station (433.92 MHz) |
|
DM1810-434MN |
DM1810 Field Node (433.92 MHz) |
|
DM1810-434MN-V |
DM1810 Field Node with Host Serial Interface (433.92 MHz) |
|
DM1810-434MR |
DM1810 Network Router (433.92 MHz) |
|
DM1810-434MR-V |
DM1810 Network Router (433.92 MHz) |
|
DM1810-434MR-PAH & PBH |
DM1810 Packaged Network Routers for Horizontal Mounting (433.92 MHz) |
|
DM1810-434MR-PAV & PBV |
DM1810 Packaged Network Routers for Vertical Mounting (433.92 MHz) |
|
DM1810-916MB |
DM1810 Base Station (916.50 MHz) |
|
DM1810-916MN |
DM1810 Field Node (916.50 MHz) |
|
DM1810-916MN-V |
DM1810 Field Node with Host Serial Interface (916.50 MHz) |
|
DM1810-916MR |
DM1810 Network Router (916.50 MHz) |
|
DM1810-916MR-V |
DM1810 Network Router (916.50 MHz) |
|
DM1810-916MR-PAH & PBH |
DM1810 Packaged Network Routers for Horizontal Mounting (916.50 MHz) |
|
DM1810-916MR-PAV & PBV |
DM1810 Packaged Network Routers for Vertical Mounting (916.50 MHz) |
|
IM1800 |
DM1810 Application Interface Module |
|
IM1800-1 |
DM1810 Application Interface Module |
Development Kits |
 |
DM1810-DK Development Kit
|
 |
DM2200-DK Development Kit
The DM2200 Development Kit is used to embed wireless connectivity for smaller mesh environments.
DM2200-434-DK
DM2200-916-DK
Download the DM2200-DK Development Kit Brochure
Download the DM2200-DK Development Kit CD (zip format)
|
DM Mesh Network
Application Notes
AN1800-1 2.3
DM1800 V2.2 and V2.3 Application Programming,
provides an overall discussion of application software development for a DM1800 MESH network using V2.2 or V2.3 firmware, plus an example thermistor temperature sensor application.
Download AN1800-1 2.3 Zip File
AN1800-1 2.4
DM1800 V2.4 Application Programming,
provides an overall discussion of application software development for a DM1800 MESH network using V2.4 firmware, plus an example thermistor temperature sensor application.
Download AN1800-1 2.4 Zip File
AN1800-2
DM1800 Poll,
allows users to poll nodes, read and write to digital output and display input and output commands.
Download AN1800-2 Zip File
AN1800-3
DM1800 UART Operation
Download AN1800-3 PDF File
AN1800-4
DM1800 Serial
Download AN1800-4 Zip File
AN1800-5
DM1800 Web Based App Note
Download AN1800-5 PDF File
AN1800-6
DM1800 ASP DLL
Download AN1800-6 Zip File
AN1800-7 2.2
DM1800/DM1810 Sleep Duty Cycle Demonstration
Download AN1800-7 2.2 Zip File
AN1800-7 2.3
DM1800/DM1810 Sleep Duty Cycle Demonstration
Download AN1800-7 2.3 Zip File
AN1810-1 2.2
DM1810 V2.2 Application Programming
Download AN1810-1 2.2 Zip File
AN1810-1 2.3
DM1810 V2.3 Application Programming
Download AN1810-1 2.3 Zip File
AN1810-1 2.4
DM1810 V2.4 Application Programming,
provides an overall discussion of application software development for a DM1810 MESH network using V2.4 firmware, plus an example thermistor temperature sensor application.
Download AN1810-1 2.4 Zip File
AN1810-1 2.5
DM1810 V2.5 Application Programming,
provides an overall discussion of application software development for a DM1810 MESH network using V2.5 firmware, plus an example thermistor temperature sensor application.
Download AN1810-1 2.5 Zip File
AN2200-1
DM2200 Temperature Sensor Demonstration
Download AN2200-1 Zip File
AN2200-2
DM2200 Sleep Duty Cycle Demonstration
Download AN2200-2 Zip File
AN2200-3
DM2200 Demo Program
Download AN2200-3 Zip File
AN2200-4
ZN241G & DM2200 Remote Control Mesh
Download AN2200-4 PDF File
|
